- Swann Camera Software Download
- Swann Camera System
- Swann Wireless Security Cameras
- Swann Camera Helpline Camera
There’s an easy way to access your Swann DVR or NVR on a computer via the HomeSafe View software. You can add your security system on the software and view your security cameras from locally or remotely from your PC/laptop. Using the HomeSafe View software you can live view your cameras, playback the recordings, download any footage, manage your settings and cameras, etc.
Troubleshooting and Product Support Swann. 131 Problems and Solutions how to install swann security camera product code sw211sty. Swann Camcorder sw211sty. SWANN use DHL to deliver their equipment - so if you order online this will be what you can expect: Was advised that parcel (two delicate 4k SWANN CCTV cameras) 'were out for delivery' on 3 December 2020. Pathetic 'progress' graphic shows your parcel as 161 with parcel number 3 delivered.
Before you start, make sure you have downloaded and installed the HomeSafe View software in your computer or laptop. Also, you need to have your DVR’s information such as username and password. You can add the DVR to the software if you’re on the same network or even remotely (not in the location). Follow the steps below.
Swann Camera Software Download
Adding a Swann DVR to the HomeSafe View software
Swann Camera System
Step 1. Open HomeSafe View software on your computer. You’ll see the login screen. If it asks you to login, just click on Login and type in the password you set for the software.
If you didn’t set anything, the default password is blank (empty). So just leave it empty and login. Note: this is the password to login to the HomeSafe View software, for the software itself, it’s not the password of your Swann DVR or NVR.
Step 2. Under the Control Panel, click Group Device Management. If you can’t locate this button, go to Tool > Group Device Management at the top instead.
Step 2. Under the Control Panel, click Group Device Management. If you can’t locate this button, go to Tool > Group Device Management at the top instead.
If the computer you are using is on the same network where the Swann DVR is, you can click on Add Online Device Five nights at freddys baixar gratis. and you should see a similar window below. (Note: If the computer is not on the same network, refer to the next section of this article)
Swann Wireless Security Cameras
Select the DVR by clicking it then Add Selected Device. After doing so, type in a Device Name and the User Name and Password you set at the initial boot up of the DVR. So, here you have to enter the username/password. Once you are done, click on Add and proceed to Importing Cameras (read next section)
The computer is not on the same network
If the computer is not on the same network, click on Add Device and you should see the window below.
Enter the information needed. It should look something like this:
Once you are done, click on Add and proceed to import the cameras (next section).
Enter the information needed. It should look something like this:
Once you are done, click on Add and proceed to import the cameras (next section).
Importing the Swann cameras to HomeSafe View software
Swann Camera Helpline Camera
Once added, the Swann DVR will now be listed at the left. Click on Import All to add all cameras to the right with the Group name of DefaultGroup. Should look something similar to the picture below.
As you can see, in our example we have the DVR added (DVR model DVR-4575) and 4 cameras listed.
Note: You can click the triangle icon beside DefaultGroup to expand.
As you can see, in our example we have the DVR added (DVR model DVR-4575) and 4 cameras listed.
Note: You can click the triangle icon beside DefaultGroup to expand.
How to view the cameras on HomeSafe View software
To view the cameras, you need to go to Main View. To do so, go back to the Control Panel > Main View. Just click and drag DefaultGroup to the right to load all of the channels.
You can open up any camera you want and you’ll be able to see the live view. If you are operating multiple DVRs and only want to load one DVR at a time, expand the DefaultGroup and only drag the required DVR.
You can open up any camera you want and you’ll be able to see the live view. If you are operating multiple DVRs and only want to load one DVR at a time, expand the DefaultGroup and only drag the required DVR.
Disclosure:Some of the links in this post are Amazon affiliate links. This means if you click on the link and purchase any item, we will receive an affiliate commission at no extra cost to you. Thanks for your support!